Hollow wrist Non hollow wrist
For solvent based paint, Nanobell 2 is available for high resistivity paint (over 6MΩ.cm).
For water based paint, Nanobell 2 has to be supplied from an isolated table, because of the high conductivity of paint.
|Designation||Value||Unit: metric (US)|
|Weight||5 (11)||kg (lbs)|
|Viscosity Scale (min-max)||20 - 50||seconds FORD Cup#4|
|Maximum Material Pressure||10||bar (psi)|
|Minimum Paint Flow||30||cc/min (gal/min)|
|Maximum Paint Flow||750||cc/min (gal/min)|
|Maximum Total Air Consumption||1435||NL/min|
|Rotation Speed||5000 - 45000||rpm|
|ATEX Certification||II 2 G 350 mJ < Ex < 2J|
|High Voltage Unit||UHT158|
|High Voltage Control Module||GNM200/GNM300: II (2) G [350 mJ < Ex < 2J]|
|Nanobell 2 atomizer - non hollow wrist - solvent based paint resistivity >0.5 Mohms.cm||Contact us|
|Nanobell 2 atomizer - non hollow wrist - water based paint||910016902|
|Nanobell 2 atomizer - hollow wrist - water based paint||910016903|
|Nanobell 2 atomizer - hollow wrist - solvent based paint resistivity >6 Mohms.cm||910016011|
|Nanobell 2 atomizer - non hollow wrist - solvent based paint resistivity >6 Mohms.cm||910016012|
|Nanobell 2 adaptor for TX250 robot||910018264|
|Nanobell 2 adaptor for IRB4400 robot||910018261|
|Nanobell 2 adaptor for EPX 2050/2900 robot||910018263|
|Nanobell 2 adaptor for P250 robot||910019313|
|Nanobell 2 gun head - option||910019815|
|Nanobell 2 adaptor for RX160 robot||910018262|
|Electric kit : GNM200 110V + low voltage cable + BSC 300 + microphone||910027069|
|Electric kit : GNM200 220V + low voltage cable + BSC 300 + microphone||910027016|
|KIT Hollow wrist -> full wrist||910018929|
|KIT full wrist -> hollow wrist||910018930|
|Gun spraying head||910019815|
|Equipotential plate for gun version||910002722|
|Maintenance Kit for NANOBELL 2||910022761|
|BELL CUP EC35 Aluminum||910000877|
|BELL CUP EC35 Titanium||910008677|
|BELL CUP EC50 Aluminum||910000876|
|BELL CUP EC65 Aluminum||1527176|
|BELL CUP EC65 OAC Aluminum||910001849|
|BELL CUP EC65 Titanium||1527175|
|BELL CUP EC80 Aluminum||910000202|
Format : application/pdf
Size : 903Ko
Format : application/pdf
Size : 19Mo
Epoxy primer/sealer is a non-porous finish that is typically recommended as the first base coat over bare steel.
Designed to hide profile & surface imperfections, multi-component polyurethane primers & sealers improve adhesion of top coats to the substrate due to the addition of a hardener.
Designed to hide profile & surface imperfections, water-based primers & sealers are environmentally friendly.
Designed to hide profile & surface imperfections, polyurethane primers & sealers promote adhesion of top coats to the substrate.
Some anti-corrosion materials are available in water-based versions. These green paints have a longer dry time, but meet most environmental requirements & have excellent protective qualities.
Solvent-free epoxy coatings are designed for long-term protection of steel & concrete structures against corrosion, abrasion & chemical attack. Operating temperature ranges from –40F to 1040F.
Water-Based Wood Stains have all the advantages of oil-based stains. They spread easily, can be repaired, blend effortlessly & have plenty of open time. The thicker formula allows for controlled penetration, which will reduce blotching on softer woods such as Aspen, Pine & Maple.
UV-resistant epoxy systems mixed with hardener cure faster & in moist conditions.
UV curable epoxy systems do not require the addition of curing agents. They cure within minutes, or even seconds, and have unlimited working times.
Top Coat Epoxys are used for decorative flooring applications, such as Terrazzo flooring, chip flooring & colored aggregate flooring.
Water-based polyurethane is popular because of its low odor & low toxicity. It goes on clear without adding a faint color like oil-based versions do & it dries much faster.
The newest metallic epoxy system on the market allows contractors to heighten the effects & make floors look three-dimensional.
Polyurethane water-based coatings offer a very high chemical/physical resistance & steel effect & are environmentally friendly.
A two-component 100%-solid epoxy blended with metallic pigments, Metal Fusion is self-leveling, allowing easy application & seamless floor surfaces.